PY68

Logic controller for automation solutions based on KNX protocol. This allows small and medium-sized systems to be automated with an architecture including KNX and a DALI control via an appropriate gateway. The controller is also suitable for large systems with a BMS-operated architecture including KNX and DALI. The logic controller can be used as a gateway to translate and consent communication between different system components and as an aggregator for saving, analysing and sending data. It can also be used as a user interface for displaying relevant information on mobile devices and as an event controller that sends e-mails in case of problems.
Applications:
-Logic functions.
-WEB SCADA display for PCs and touch devices.
-Cross-standard Gateway between KNX and Modbus RTU/TCP.
-BACnet Server (500 points).
-Integration with third party devices on RS-232 (IR, AV).
-Streaming camera.
-Data logger with trends.
-BACnet certified BACnet Application Specific Controller (B-ASC).

-Luminaire monitoring for Motus DALI emergency, connected to the KNX/DALI gateway code PC68, appropriate programming and software. Contact iGuzzini for more details on the specific system configuration.

Technical data:
Power supply voltage: 24 V DC.
Energy consumption: 2 W.
LED 1 indicator: Green LED (CPU load). LED 2 indicator: Green LED (operating) or red LED (Reset).
Interface: 1 KNX, 1 10BaseT/100BaseTX, 1 RS-485 (including unterminated 47 K Ohm polarisation resistors).
1 RS-232, 1 USB2.0, 1 reset button.

Device width: 3 DIN modules (~54 mm);

Operation: -5 ... +45 °C
Max humidity: 93%, without condensation
Environment: can be used at heights of up to 2000 m above sea level (SLM)
Dimensions: 90 x 52 x 58 mm (HxWxD)