Q368
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Initial profile in extruded aluminium - Minimal (frameless) version for flush with ceiling mounting and up-down emission; methacrylate opal lower screen (diffused general light); screen set up for connecting several lengths by overlapping. Methacrylate diffusing screen for upper emission. Light flow split into approx. 70% down / 30% up.
Dimensions
General (mm)
1208x91x105
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
3.1
Material
Aluminium and technopolymer
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
5474
W system
51.6
lm source
8050
W source
45
Luminous efficiency - lm/W (system value)
106.09
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
1551
Light output ratio (LOR)
68
Optic and beam angle
GL - general lighting
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 96
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
> 50,000h - L90 - B10 (Ta 25°C)
Electrical data
ZVEI code
LED
Installation
Description
Installation can be pendant-mounted using suitable accessories to be ordered separately. The initial modules can be used individually for various applications if completed with accessory caps and the required LED module.;
Mounting
Wall surface, Ceiling pendant
Wiring
Set up to house the up-down LED modules required by the system.
Notes
Take care with the system configuration. To make continuous lines of lighting, use the intermediate modules. To complete a continuous line correctly there must always be an initial module at the start or end of the composition.