Q583
Colour
Technical Data
last update: 02/12/2025Description
Linear miniaturised recessed luminaire with 15 optical elements for LED lamps - fixed optic. Despite the ultracompact size of the product, the patented technology of the optic system guarantees an efficient flow and a high level of controlled glare visual comfort. Main body with die-cast zamak radiant surface, minimal (frameless) version for mounting flush with the ceiling. Metallised, thermoplastic, high definition Opti Beam reflectors, integrated in a set-back position in the anti-glare screen. Supplied with DALI power supply unit connected to the luminaire.
Dimensions
General (mm)
272x25x50
Shape
Rectangular
Recessed hole dimensions (mm)
274x28
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.7
Material
Die-cast aluminium and thermoplastic
Product certification
-
BIS -
BVB Byggvarube- dömningen -
QCERT
Photometric data
Details
lm system
1784.5
W system
33
lm source
2150
W source
29
Luminous efficiency - lm/W (system value)
54.08
lm in emergency mode
-
Light output ratio (LOR)
83
Optic and beam angle
WF - Wide Flood 58°
Adjustability
fixed
Light colour quality
CRI (minimum) 90
Colour temperature
2700 K
MacAdam Step
3
Lifetime LED 1
> 50,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Driver included
Dimmable option
Dimmable
Control
DALI
Installation
Description
Recessed with steel wire springs on the specific adapter (included) which allows flush-mounting with the ceiling. Adapter fixed to false ceiling (compatible thicknesses of 12.5 / 15 / 20 mm) with screws; subsequent filling and smoothing operations; insertion of luminaire body and aesthetic end finishing. A special protective sheath allows finishing operations on the plasterboard to be simplified and speeded up. Preparation hole 28 x 274.;
Mounting
Wall recessed, Ceiling recessed
Wiring
On the power supply unit with terminal board included.
Notes
The special steel wire spring provided is required to facilitate the eventual extraction of the recessed body once it has been inserted.