Q694
Colour
Optional accessories
Technical Data
last update: 04/12/2025Description
Outdoor floodlight designed to use LED lamps. Consists of an optical assembly and a base. The optical assembly, arm and base are made of aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather resistance. 4mm thick extra-clear sodium-calcium closure glass. Secured using a 360° adjustable base.
Adjustable horizontally.
Complete with an LED circuit and an Opti Beam optic system and fitted with a protection system against polarity inversion. If connected in series with more than one product, the circuit stops the whole line turning off following an incorrect connection or product breakage.
Option of mounting optical accessories externally using an accessory-holder frame.
Black rubber outlet cable complete with an anti-transpiration device.
Electronic control gear to be ordered separately. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
80
Diameter (mm)
ø49
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.4
Product certification
-
BIS -
BVB Byggvarube- dömningen -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
379.5
W system
6.1
lm source
690
W source
6.1
Luminous efficiency - lm/W (system value)
62.21
lm in emergency mode
-
Light output ratio (LOR)
55
Optic and beam angle
WF - Wide Flood 42°
Adjustability
up/down tilt
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 94
Colour temperature
2700 K
MacAdam Step
2
Lifetime LED 1
99,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
65,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Dimmable option
Dimmable
Lifetime of product at ambient operating temperature
≥ 50.000h Ta=40°C
LED Current
550
Installation
Description
Floor, wall or ceiling installation and ground installation using a spike.;
Mounting
Wall surface, Ground spike
Wiring
The product is supplied with a black rubber outlet cable complete with an anti-transpiration device.