QY39
Colour
Technical Data
last update: 01/12/2025Description
Surface-mounted emergency lighting luminaire with a symmetrical antipanic optic (open area).
3 h autonomy with 12 h recharging time for maximum capacity.
Self-test function.
Test function that can be activated via a Laser pointer.
Built-in red/green LEDs for indicating different device states.
Latest generation LiFePO4 (Lithium Iron Phosphate) 6.4 V 1.5 Ah battery.
Power in non maintained mode: 0.52 W -
Power in maintained mode: 3.5 W -
Centralised on/off command module available on request for 150 or 250 luminaires (for this function further cabling with 2 conductors is required)
Dimensions
General (mm)
176x176x54
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.52
Material
Thermoplastic
Product certification
-
CE -
ENEC pending
Photometric data
Details
lm system
219.58
W system
4.5
lm source
W source
Luminous efficiency - lm/W (system value)
48.8
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
Optics for Antic-Panic
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
5000 K
Lifetime LED 1
> 50,000h - L70 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic with inverter Driver included
Mounting options
Integral
Control
On/off
Installation
Description
Surface-mounted. The control electronics and batteries are housed inside the luminaire.;
Mounting
Ceiling surface
Wiring
2 cabling options: non maintained (SE) or maintained (SA) requires 2 conductors (N/L). The operating mode is selected via a dip-switch.
Maintained switching via a switch requires 3 conductors (N/L/L1). Cannot be used as a general lighting luminaire.
Notes
CCT 5000K (4250÷5350K)