V949
Colour
Optional accessories
Technical Data
last update: 02/12/2025Description
Outdoor luminaire with direct light street optic, designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are: degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a textured liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Option of adjusting the inclination in relation to the road surface of +20°/-5° (in 5° steps) for a pole-top installation and +5°/20° (in 5° steps) for a lateral installation. 5 mm thick sodium-calcium closing glass secured to product with 4 screws. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Product fitted with a multi-pole NEMA 7 PIN socket, including an IP65 cap. DALI electronic ballast. Driver with automatic internal temperature control system. Optic and wiring compartment can be opened with everyday tools. The light flow emitted in the upper hemisphere of the system in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel. Custom asymmetrical optics, specially designed for the Brisbane municipality.
Dimensions
General (mm)
529x268x204
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
AEMO -
QCERT
Photometric data
Details
lm system
868
W system
7
lm source
W source
Luminous efficiency - lm/W (system value)
124
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
10
Light output ratio (LOR)
100
Optic and beam angle
Light colour quality
CRI (minimum) 70
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -40°C a 35°C.
ZVEI code
LED
Control
DALI-2
Installation
Description
The floodlight can be installed with a pole-top or lateral mounting using a die-cast aluminium pole-top for end diameters of ø 46/60/76 mm.;
Mounting
Wall arm, Poletop bottom entry