6566
Colour
Optional accessories
Technical Data
last update: 02/12/2025Description
Outdoor luminaire with direct light street optic for span-wire installation. The optical assembly is made of EN1706AC 46100LF aluminium alloy, subjected to a multi-step, pre-treatment process in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a textured acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 5 mm thick, sodium-calcium closing glass for both optical assemblies is fitted to the product via 3 captive screws on each side. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Product fitted with a multi-pole Zhaga 4 PIN Up socket. Power supply with automatic internal temperature control system. Complete with Warm White monochrome LED circuit. The wiring and optical assembly can be opened with everyday tools. All external screws are made of stainless steel.
Dimensions
Diameter (mm)
ø460
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.64
Material
Aluminium
Product certification
-
BIS -
CE -
DARKSKY -
ENEC-03 -
QCERT -
Zhaga-D4i
Photometric data
Details
lm system
5610
W system
38.3
lm source
W source
Luminous efficiency - lm/W (system value)
146.48
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
STWrs - Span wire Optic for Medium Road
Adjustability
fixed
Light colour quality
CRI (minimum) 70 - Rf (Colour Fidelity Index) 78 - Rg (Gamut Index) 95
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -40°C a 50°C.
Inrush current
21 A / 300 µs
Minimum dimming
10
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
Midnight preset / ZHAGA
Installation
Description
The projector can be installed with a span-wire mounting using cables with 6 to 12 mm diameters. The attachment is included in the end product code.;
Mounting
Span-wire installation