Region and Language

Product standard

Your language

The North America market website will be available by November 2025. After clicking the 'Update' button, you will be redirected to the legacy version of the website. Le site Web du marché nord-américain sera disponible d'ici novembre 2025. Après avoir cliqué sur le bouton « Mettre à jour », vous serez redirigé vers le legacy version du site Web.
Update Update

BD43

Downloads

Colour

Optional accessories

Technical Data

last update: 21/10/2025
Description
Floodlight designed to use 35W HIT (G8.5) metal halide discharge lamps with asymmetrical longitudinal (AL) optic. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy coated with liquid acrylic paint (colour: RAL 9007 grey) or textured liquid paint (colour: RAL 9016 white) with a high level of resistance to atmospheric agents and UV rays. The 5 mm thick transparent, tempered sodium – calcium safety glass is joined to the frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a galvanised steel safety cable. The optical assembly contains the reflector made of 99.93% super-pure aluminium subjected to anodic oxidation and polishing. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. The luminaire is set up for pass-through wiring using two M24x1.5 nickel–plated brass cable clamps, suitable for the entry of cables with diameter between 7.0 and 16.0 mm. The connection between the mains and the control gear is made using a 3-pole terminal board with quick-coupling system. iPro can be angled relative to the horizontal plane (+95°/ -5°) using an extruded aluminium bracket on which the graduated scale (15° steps) is marked with serigraphy. The internal silicone seals guarantee watertightness IP66. A number of accessories are available: spill-rings, lamellar louvre, visor, directional flaps, glass refractors, diffusers and coloured filters which can be applied in pairs. All external screws used are made of A2 stainless steel.
Dimensions
General (mm) 155x155x165
Technical performance
  • Class II

    Class II

  • Completely protected against penetration of dust, Protected against waves

    Completely protected against penetration of dust, Protected against waves

  • Protected against 2 J shocks

    Protected against 2 J shocks

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Aluminium
Product certification
  • CE
    CE
  • ENEC-03
    ENEC-03

Photometric data

Details

W source
35 - 35
lm in emergency mode
-
Light output ratio (LOR)
42
Optic and beam angle
A - Asymmetrical
Adjustability
directional

Electrical data

Operating ambient temperature range da -20°C a +35°C.
ZVEI code HIT-TC-CE
Power Supply Electronic Control gear included
Mounting options Integral

Installation

Description

Wall-, ceiling- and ground-mounted using bracket and fisher (not included). Can be mounted on branches with belt accessory. Dimensions:;
Mounting Wall surface, Ground spike, Ceiling surface, Free standing
Wiring Luminaire with electronic control gear.

Notes

IK 09 with protective grille accessory
Subscribe