BU64

Outdoor luminaire with direct light wide street optic for a high level of visual comfort (G4), designed to use LED lamps. Optical assembly made of die-cast aluminium, with dual phosphorous – chromium plating of the base metal, passivation at 120°C, RAL 9007 grey liquid paint, curing at 150° C; possibility of adjusting, also with a graduated scale, the angle relative to the road surface by +15°/-10° (in 5° steps) in the pole-top installation and +5°/-20° (in 5° steps) in the lateral installation. 5 mm thick sodium-calcium closing glass. The glass secured to the frame closes the LED optical assembly which is fixed to the components assembly with a hinge and 2 screws. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Complete with circuit having Neutral White monochrome LEDs and silver aluminium reflectors. LED assembly can be replaced directly on site. Possibility of replacing the LEDs in groups of 12 in the laboratory. Driver with automatic inner temperature control system. Driver with 4 different operating profiles, without the aid of external controls, fixed profiles (1_2_3) at 100% corresponding to three different lumen outputs and profile (4) with midnight point recognition and lumen output related to profile 1. Profiles can be selected using microswitches (operating cycles can be customised using dedicated software and a dedicated USB interface). Dali and 0_10V versions available upon request. Replaceable power supply. The optical assembly is fixed to the wall-mounted or pole-top attachment with two clamping screws and two safety grub screws facilitate assembly. The luminous flux emitted in the upper hemisphere of the System in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.

The floodlight can be installed with pole-top or lateral mounting on tapered poles, using a die-cast aluminium cylinder for diameters of 46/60/76 mm. From ø60 to ø76mm without use of the standard adapter, from ø46 to ø 60mm with the adapter. Secured to the pole by two screws and two safety locknuts.;

Driver compatible with CLO (Constant Lumen Output) system. Pen Profiler required for its installation.