BV97
Colour
Optional accessories
Technical Data
last update: 07/11/2025Description
Outdoor luminaire with a Wide Flood optic, designed to use LED RGBW lamps. Consists of an optical assembly with a base and an aluminium alloy frame. The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. 5 mm thick colourless transparent tempered sodium-calcium closing glass. Product can be tilted on the vertical plane by +5°/-90° with a 10° step graduated scale and fitted with mechanical blocks that guarantee stable light beam aiming. Horizontal aiming can be adjusted using the slots on which the base is provided with a ±30° adjustment option.
High visual comfort. High yield, homogenous light distribution polymer optic lenses. Circuit complete with single chip RGBW LEDs (Red Green Blue and White LEDs) and a DMX512-RDM electronic check driver . Removable control gear connected with quick-coupling connectors. 220-240V ac 50/60Hz electronic ballast. Replaceable control gear. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
406x276
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.6
Product certification
-
BIS -
CE -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
2440.84
W system
43.8
lm source
3590
W source
37
Luminous efficiency - lm/W (system value)
55.73
lm in emergency mode
-
Light output ratio (LOR)
68
Optic and beam angle
WF - Wide Flood 44°
Adjustability
directional
Colour temperature
RGBW - 4000K K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 35°C.
Inrush current
40 A / - µs
ZVEI code
LED
Power Supply
Electronic Driver
Control
DMX-RDM
Installation
Description
The luminaire can be installed on the wall or floor using a standard base.
.;
Mounting
Wall arm, Ground surface, Wall surface
Wiring
Luminaire ready for pass-through wiring. Product perfect watertightness at the power cable entry point is guaranteed by 2 x M24x1,5 nickel-plated brass cable glands suitable for cables with a max external ø14mm (cross-section from 1.5mm²). Push in terminal board.
Notes
The following are available as accessories: refractor for elliptical light flow distribution, diffusing glass, visor, directional flaps, protective grille.