BX01

Outdoor luminaire with direct light narrow street optic for a high level of visual comfort (G4), designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Option of also adjusting, with a graduated scale, the inclination in relation to the road surface of +15°/-10° (in 5° steps) for a pole-top installation and +5°/-20° (in 5° steps) for a lateral installation. 5 mm thick tempered sodium-calcium closure glass. The glass secured to the frame closes the led optical assembly which is secured to the components assembly with a hinge and 2 screws. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Complete with circuit featuring monochrome LEDs and silver aluminium reflectors. LED assembly can be replaced directly on site. Possibility of replacing the leds in groups of 12 in the laboratory. Power supply unit, connected with fast-coupling connectors, can be removed with clip. Multipower Half Phase electronic control gear with or without a control cable. The Driver recognises midnight by reducing the light flux two hours before midnight from 100% to 70%. This lasts for 6 hours and then the flux is increased to 90% until the luminaire turns off. If the control cable line state is altered (for example, with a sensor) light flux returns to 100%. Driver with automatic internal temperature control system. The optical assembly is fixed to the wall-mounted or pole-top attachment with two clamping screws and two safety grub screws facilitate assembly. The light flow emitted in the upper hemisphere of the system in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.

The floodlight can be installed with pole-top or lateral mounting on tapered poles, using a die-cast aluminium cylinder for diameters of 46/60/76 mm. Diameters from 60 to 76 mm without using the adaptor, and from 46 to 60 mm with the adaptor. Secured to pole by two bolts and two safety locking nuts.;