BY79
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Outdoor luminaire with an elliptical optic, designed to use LED lamps.
The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Diffusor made of shockproof, UV-stabilised injection moulded polycarbonate. Complete with circuit fitted with Warm White monochrome LEDs. Optical assembly consisting of an anodized super-pure aluminium upper reflector, a methacrylate lens and a lower reflector made of
metallised PC. Replaceable LEDs and driver.
Electronic selv driver with automatic internal temperature control system. Overvoltage protection up to 9KV.
All external screws are made of stainless steel.
Dimensions
Diameter (mm)
ø323
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
BIS -
BVB Byggvarube- dömningen -
CE -
QCERT
Photometric data
Details
lm system
2130
W system
20
lm source
W source
Luminous efficiency - lm/W (system value)
106.5
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
98
Light output ratio (LOR)
100
Optic and beam angle
E - Elliptical
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
3000 K
MacAdam Step
2
Lifetime LED 1
59,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Control
On/off
Installation
Description
The luminaire can be installed with a pole-top mounting on poles with ø 60mm and 76mm end part using X102 and X126 accessories. Secured to the pole by two bolts.;
Mounting
Pole-top
Wiring
The product is supplied wired and with an outlet cable (2x1mm) 500mm long.