E083
Colour
Optional accessories
Technical Data
last update: 08/11/2025Description
Recessed luminaire that can be installed in walls, ceilings and floors (only with a spring). It is designed to use white monochrome LED lamps, powered with a continuous current of Max 350mA per luminaire. The D = 50 mm round frame has hidden screws, an AISI 304 stainless steel body and frame and an extra-clear, sodium - calcium tempered glass cover. The luminaire is fixed to the outer casing using special locking seals that hold it in place. The unit comes complete with LED circuit and a metallized plastic OPTI BEAM reflector. The product's wiring system features an A2 stainless steel cable gland with a 1800 mm long H05RNF type 2x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable. Two types of outer casing are available for installation and both can be ordered separately from the plastic optic assembly. The glass unit, optical assembly and outer casing together guarantee a maximum static load resistance of 2000 kg. The maximum surface temperature of the glass is less than 40°. Luminaire protected against polarity inversion.
Dimensions
Diameter (mm)
ø50
Shape
Round
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.54
Material
Stainless steel
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
387.6
W system
4
lm source
510
W source
3.8
Luminous efficiency - lm/W (system value)
96.9
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
388
Light output ratio (LOR)
76
Optic and beam angle
WF - Wide Flood 42°
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 95
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
98,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
89,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -25°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Dimmable option
Dimmable
LED Current
350
Installation
Description
The product is fixed to the outer casing using special locking seals with toolfree installation. The unit can be recessed in floors, ceilings or walls using the outer casing for installation. It can also be installed in counter walls and false ceilings using special spring accessories to be ordered separately.;
Mounting
Wall recessed, Floor recessed, Ceiling recessed, Ground recessed
Wiring
Ballasts available: 350mA traditional and watertight IP67 versions. The product comes complete with a 1800 mm long H05RNF type 2x1 mm² output power cable and an electronic plate with a 350mA Max LED. Ballast to be ordered separately.
Notes
IP68 rating on both the product and the cable using IP68 connectors
* The product is not suitable for installation in swimming pools and fountains.