E178
Colour
Technical Data
last update: 21/10/2025Description
Recessed emergency lighting luminaire with an elliptical optic (escape route).
3 h autonomy with 12 h recharging time for maximum capacity.
Self-test function. Test function via button on front, accessible when product is installed.
Test function that can be activated via a Laser pointer.
Built-in red/green LEDs for indicating different device states.
Latest generation LiFePO4 (Lithium Iron Phosphate) 6.4 V 1.5 Ah battery.
Power in non maintained mode: 0.52 W -
Power in maintained mode: 3.5 W -
Centralised on/off command module available on request for 150 or 250 luminaires (for this function further cabling with 2 conductors is required)
Dimensions
Diameter (mm)
ø90
Shape
Round
Recessed hole dimensions (mm)
ø72
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Product certification
-
CE -
NOM
Photometric data
Details
lm system
199.64
W system
3.4
lm source
W source
Luminous efficiency - lm/W (system value)
58.72
lm in emergency mode
200
Light output ratio (LOR)
100
Optic and beam angle
Optics for escape routes
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
5000 K
Lifetime LED 1
> 50,000h - L70 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic with inverter Driver included
Mounting options
Integral
Control
On/off
Installation
Description
On panels between 1 and 30 mm thick. Drill hole for installation between Ø 70-75 mm. The control electronics and batteries can pass through the hole. Minimum height above plasterboard: 90 mm.;
Mounting
Ceiling recessed
Wiring
2 cabling options: non maintained (SE) or maintained (SA) requires 2 conductors (N/L). The operating mode is selected via a dip-switch.
Maintained switching via a switch requires 3 conductors (N/L/L1). Cannot be used as a general lighting luminaire.
Notes
CCT 5000K (4250÷5350K)