EJ38
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 02/12/2025Description
Outdoor luminaire with elliptical optic designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Diffusor made of shockproof, UV-stabilised injection moulded polycarbonate. Complete with circuit fitted with Neutral White monochrome LEDs. Optical assembly consisting of an anodized super-pure aluminium upper reflector, a methacrylate lens and a lower reflector made of metallised PC. Replaceable leds and driver. Product fitted with a multi-pole NEMA 7 PIN socket, including an IP65 cap. Dali selv driver with automatic internal temperature control system. All external screws are made of stainless steel.
Dimensions
Diameter (mm)
ø323
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
4
Material
Aluminium and thermoplastic
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
3680
W system
30.5
lm source
W source
Luminous efficiency - lm/W (system value)
120.66
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
167
Light output ratio (LOR)
100
Optic and beam angle
E - Elliptical
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 94
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -40°C a 50°C.
Inrush current
21 A / 300 µs
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Dimmable option
Dimmable
Control
DALI-2
Lifetime of product at ambient operating temperature
≥ 80.000h Ta=40°C
Installation
Description
The spotlight can be installed with a pole-top mounting on poles with ø 60mm and 76mm end part using X102 and X126 accessories. Secured to the pole by two bolts.;
Mounting
Pole-top
Wiring
The product is supplied wired and with an outlet cable.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories