RE11
Colour
Optional accessories
Technical Data
last update: 10/11/2025Description
Linear lighting product - featuring white monochrome LEDs with a high colour rendering index - located on a flexible white circuit: the close spacing of the LEDs along the circuit creates an extremely homogeneous and diffuse linear lighting emission. With end caps and transparent PVC sheath for external protection. The protection rating is IP65 for the full-length strip (not cut). The ends of the circuits are fitted with connectors which have an IP20 protection rating, so the installer is responsible for completing connector insulation operations. Supplied in 5-metre long coils wound in suitable supports. The package includes a connections kit for in line or power supply connections. Can be installed using the mounting accessories available. The strip can be cut at set distances between the LEDs (see instruction sheet). If intermediate cuts are made, use the caps included and carefully seal the cut ends to restore protection. LED characteristics: 3500K white colour (the value is approximate and may vary) - 266 LEDs/m - approximate power of strip 5W/m - operating voltage 24V. To ensure correct heat dissipation, we suggest the strip is used in combination with the profiles available. power supplies to be ordered separately.
Dimensions
General (mm)
5000x12x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.22
Material
Technopolymer
Product certification
-
BIS -
CE -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
2700
W system
25
lm source
540
W source
5
Luminous efficiency - lm/W (system value)
108
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
77
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 90 - Rf (Colour Fidelity Index) 90 - Rg (Gamut Index) 98
Colour temperature
3500 K
MacAdam Step
3
Electrical data
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Installation
Description
The strip can be combined with all Underscore 15 profiles; alternative simplified installation kits are also available: clips (item code MWG2: 10 pieces) and aluminium rigid support (item code MWG1: 5 pieces x 1 m);
Mounting
Wall surface
Wiring
Constant voltage power supplies to be ordered separately; to check that the power supplies available are used correctly, consult the instruction sheet. Interface for DALI dimming available. Power supply/coil connection with connectors (IP20) included in the pack with the strip.
Notes
The connectors provided guarantee protection rating IP20. If the strip is cut (in the appropriate areas) carefully restore the seal after making the connection; accessory connection kits are available.