RH64
Colour
Technical Data
last update: 21/10/2025Description
Recessed emergency lighting luminaire with an elliptical optic (escape route).
3 h autonomy with 12 h recharging time for maximum capacity.
Self-test function. Test function via button on front, accessible when product is installed.
Test function that can be activated via a Laser pointer.
Built-in red/green LEDs for indicating different device states.
Latest generation LiFePO4 (Lithium Iron Phosphate) 3.2 V 3.2 Ah battery.
Power in non maintained mode: 0.22 W -
Power in maintained mode: 3.66 W -
Centralised on/off command module available on request for 150/250 luminaires (for this function further cabling with 2 conductors is required)
Dimensions
Diameter (mm)
ø90
Shape
Round
Recessed hole dimensions (mm)
ø72
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.33
Material
Thermoplastic
Product certification
-
CE
Photometric data
Details
lm system
200
W system
3.6
lm source
W source
Luminous efficiency - lm/W (system value)
55.56
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
Optics for escape routes
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
5000 K
Lifetime LED 1
> 50,000h - L70 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic with inverter Driver included
Mounting options
Integral
Control
DALI
Installation
Description
On panels between 1 and 30 mm thick. Drill hole for installation between Ø 70-75 mm. The control electronics and batteries can pass through the hole. Minimum height above plasterboard: 90 mm.;
Mounting
Ceiling recessed
Wiring
2 cabling options: non maintained (SE) or maintained (SA) requires 2 conductors (N/L). The operating mode is selected via a dip-switch.
Maintained switching via a switch requires 3 conductors (N/L/L1). Cannot be used as a general lighting luminaire.
DALI monitoring
DALI monitoring
Notes
CCT 5000K (4250÷5350K)