S420
Colour
Optional accessories
Technical Data
last update: 01/12/2025Description
Outdoor luminaire with direct light street optic. The optical assembly is made of EN1706AC 46100LF aluminium alloy, subjected to a multi-step, pre-treatment process in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a textured acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 5 mm thick, sodium-calcium closing glass for both optical assemblies is fitted to the product via 3 captive screws on each side. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Product fitted with a multi-pole Zhaga 4 PIN Down socket. Complete with Neutral White monochrome LED circuit. The wiring and optical assembly can be opened with everyday tools. The luminous flux emitted in the upper hemisphere of the system in the horizontal position is null (when used with a black finish pole-mounting). Product pre-wired with a 1.1m long outlet cable. The IP68 connector can be purchased separately as an accessory. All external screws are made of stainless steel.
Dimensions
Diameter (mm)
ø460
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
BIS -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
5710
W system
40
lm source
W source
Luminous efficiency - lm/W (system value)
142.75
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
STZr - Street optics for urban and suburban pedestrian crossings.
Adjustability
fixed
Light colour quality
CRI (minimum) 70 - Rf (Colour Fidelity Index) 76 - Rg (Gamut Index) 91
Colour temperature
4000 K
MacAdam Step
3
Electrical data
Operating ambient temperature range
da -20°C a +35°C. (*)
Inrush current
21 A / 300 µs
Minimum dimming
10
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Dimmable option
Dimmable
Control
Midnight preset / ZHAGA
Installation
Description
The optical assembly can be installed using two pole-tops that can be ordered separately as an accessory: one for Ø 60mm and one for Ø76mm. It can be installed on Ø102mm pole-tops using a reducer that can be purchased as an accessory.;
Mounting
Pole-top
Wiring
Connection to be made with an IP68 connector, which can be purchased separately.