SF31
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 14/11/2025Description
Wall-mounted luminaire with Warm White LED lamps and an ADJ BEAM DOWN adjustable cone optic. Consists of an optical assembly, a top glass, a bottom glass and a cover guard to be purchased separately. The optical assembly is made of an aluminium alloy, subjected to a multi-step, pre-treatment process in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The tempered sodium-calcium upper cover glass has black serigraphy on the edge and is 5mm thick. The tempered sodium-calcium lower cover glass has black serigraphy on the edge and is 4mm thick. The optic can be adjusted by varying the position of the optic inside the product. The cone moves from a minimum opening of 65° to a maximum opening of 115°. Fitted with a PG13.5 cable gland for 8.5mm to 12.5mm diameter cables. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
153x123
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.66
Material
Aluminium
Product certification
-
BIS -
CE -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
198.4
W system
5.5
lm source
640
W source
3.9
Luminous efficiency - lm/W (system value)
36.07
lm in emergency mode
-
Light output ratio (LOR)
31
Optic and beam angle
Adjustable Beam Down
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 97
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Inrush current
20 A / 170 µs
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
On/off
Installation
Description
The product is fixed to the wall by opening the plate on the back of it, securing it to the wall and then rapidly fixing the luminaire to it.;
Mounting
Wall arm
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories