SR43
Colour
Optional accessories
Technical Data
last update: 01/12/2025Description
Direct light luminaire, designed to use RGB LED lamps, DMX512-RDM 220÷ 240Vac dimmable with searching and addressing function. Ceiling, wall or surface-mounted. It consists of a body and installation brackets to be ordered separately. The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals. It is subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in RGB colour and a 220÷240Vac DMX512-RDM electronic driver (power supply included). Supplied with a double PG11 and outlet cables for pass-through wiring with IP68 male/female joiners. Fitted with a PMMA diffusing filter and optics with plastic (methacrylate) lens for Flood lighting. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
340x47x77
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.27
Material
Aluminium
Product certification
-
BIS -
CE -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
399.6
W system
17.5
lm source
740
W source
13
Luminous efficiency - lm/W (system value)
22.83
lm in emergency mode
-
Light output ratio (LOR)
54
Optic and beam angle
F - Flood
Adjustability
fixed
Colour temperature
RGB K
Lifetime LED 1
75,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
74,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220 - 240 AC
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
DMX-RDM
Installation
Description
Accessories are available for installation, like adjustable AISI304 stainless steel wall-mounted arms.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
Complete with DMX-RDM control card and a 220-240V ac electronic power supply. The product is supplied with a nickel-plated brass PG11 double cable gland with H07RN-F 5x1, 5mm² rubber outlet cables for pass-through wiring with male and female IP68 connectors. Available for electrical connection and DMX-RDM control: IP68 5-pin female connector, IP68 5-pin male connector + closing cap (BZI6), and IP68 5-pin male + female connectors.
Notes
Product complete with LED lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (BZQ7).