.jpg)
2031
Colour
Technical Data
last update: 25/08/2026Description
Attachment made of G AI Si 2 UNI 5076 die cast aluminium treated with epoxy power paint with orange peel finish. The attachment is fixed to the bracket with a male holding element and blocked with three stainless steel screws and anti-loosening device. A hole located in the bottom part of the holding element is provided with a clamping screw. The diffuser neck has three teeth which ensure a perfect airtight fixing through a silicone gasket, thus allowing for the IP 45 degree of protection of the optical assembly.
Dimensions
Diameter (mm)
ø500
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
125
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
437
Total light flux at or above an angle of 90° (Lm)
93.58
Light output ratio (LOR)
36
Optic and beam angle
GL - general lighting
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HME
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
The attachment is fixed to the bracket with a male holding element and blocked with three stainless steel screws and anti-loosening device.;
Mounting
Poletop bottom entry
Wiring
The electrical group is housed inside the aluminium attachment on a supporting plate which houses: lampholder, ignitor, ballast, terminal board. The attachment can also house a capacitor. In compliance with the EN40, CEI34-31 and CEI 34-33 European standards.