.jpg)
293L
Colour
Optional components
Technical Data
last update: 04/11/2026Description
Direct light linear luminaire, designed to use monochrome LED lamps. For ground and wall installations,, the product requires an outer casing (to be purchased separately). The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals. It is subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The top of the optical assembly is closed by an 8 mm thick, non-slip glass screen, conforming to class R13 in accordance with DIN 51130, fixed with silicone. Complete with Warm White multi-LED circuit. Both the control card (available in a DMX-RDM and DALI version) and the power supply must be purchased separately. Supplied with a connector with an IP68 threaded locknut. Fitted with an Opti Beam Lens optical system with a Wide Flood optic. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
652x39x69
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1
Material
Aluminium
Photometric data
Details
lm system
826
W system
7.7
lm source
W source
Luminous efficiency - lm/W (system value)
107
lm in emergency mode
-
Optic and beam angle
WF - Wide Flood
Adjustability
fixed
Light colour quality
CRI 80
Colour temperature
4000 K
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
from -20°C to +35°C. (*)
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Control
External
Installation
Description
The outer casing (to be purchased separately) is required for recessed floor, wall and ceiling installations. The outer casing is not required for installations in panelled walls and ceilings. For floor installations a drainage channel must be constructed or gravel inserted for drainage under the outer casing before installation, to guarantee the required IP protection rating. For ceiling installations with plasterboard panels (1-29 mm thick), make the preparation openings as indicated in the instructions sheet and use the steel cables with reinforcement plates in the accessory kit.;
Mounting
Wall recessed, Floor recessed, Ceiling recessed, Ground recessed