.jpg)
3130
Colour
Technical Data
last update: 25/08/2026Description
Indoor up-down luminaire for 1x250W HIT metal halide lamp. Made up of turned aluminium body and bent extruded aluminium ring joined to the body with screws on spacers. PG11 for waterproof power supply cable. Tempered protection glasses with silicone gaskets fixed to the body with bayonet screws, aluminium component-holding plate with steel screws, power supply unit with power factor correction and anti-short circuit protection system. One-piece 99.85% superpure aluminium optics with polishing and sandblasting finish.
Dimensions
Diameter (mm)
ø620
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
250
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
5317
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
66
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Suspended by means of rigid aluminium rods with +/-80 mm adjustment device, aluminium base for wall or ceiling installation and aluminium trapezoidal element for luminaire support. Suspended by means of steel cables with piston fixing system and aluminium power supply base.;
Mounting
Ceiling pendant
Wiring
Wiring for 1x250W HIT discharge lamp contained inside the body of the luminaire.