.jpg)
4195
Colour
Technical Data
last update: 25/08/2026Description
Floodlight fitting with body and screws in A.I.S.I. 304-18-8 polished stainless steel. Die-cast aluminium junction ring with black paint finish. EPDM sealing gaskets for protection against dust and water. Asymmetrical optics in anodized aluminium. The casing for installation comprises a ring in die-cast aluminium and a tubular PVC element. The hardened safety glass can withstand static loads of 5000 kg. PG13,5 cable-clamp. Galvanized steel plate for electrical components.
Dimensions
Diameter (mm)
ø228
Shape
Round
Recessed hole dimensions (mm)
ø180
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Stainless steel
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
1425
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
29
Optic and beam angle
WW - Wall Washer
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Recessed into the ground by installing the casing flush with the surface with a gravel base for drainage beneath and cement around it to hold it in place.;
Mounting
Ground recessed
Wiring
Wiring for metal-halide and sodium 70W lamps contained in the body of the fitting. Complete with control gear and capacitor. Through wiring with two P16 water-tight cable clamps.
Notes
The luminaire should be installed with the outer casing (code 5936), which can be ordered separately.