.jpg)
4606
Colour
Technical Data
last update: 25/08/2026Description
Luminaire designed for use with superspot low-voltage 1x75W halogen lamps QR111. It is made up of a perimetric painted sheet-steel rim and a sheet-steel optical assembly painted in black. The diecast aluminium optical assembly can be extracted from the luminaire body through a special slide and a fork supporting the lamp-holding ring. The slide is fixed to a device which rotates around the vertical axis and permits a maximum 355° rotation. A cylindrical hinge in the lower end of the bracket permits a 75° inclination on the vertical plane and the block of the movement by tightening the screws.
Dimensions
General (mm)
198x198x399
Shape
Square
Recessed hole dimensions (mm)
188x188x235
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
12 VDC
Power Supply
Electronic Transformer included
Mounting options
Remote
Installation
Description
Recessed fixing into false ceilings.;
Mounting
Ceiling recessed
Wiring
Connection to the secondary of the transformer, supplied separately, for low-voltage lamps.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used.