.jpg)
4618
Colour
Technical Data
last update: 25/08/2026Description
Luminaire designed for use with metal halide 1x35/70W lamps HI-PAR30. It is made up of a perimetric painted sheet-steel rim and three sheet-steel optical assemblies painted in black. The diecast aluminium optical assemblies can be extracted from the luminaire body through a special slide and a fork supporting the lamp-holding ring. The slide is fixed to a device which rotates around the vertical axis and permits a maximum 190° rotation for the external lamp units and 90° for the internal lamp unit. A cylindrical hinge in the lower end of the bracket permits a 75° inclination on the vertical plane and the block of the movement by tightening the screws.
Dimensions
General (mm)
558x198x429
Shape
Rectangular
Recessed hole dimensions (mm)
550x188x265
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
35
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
43048
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
rotation
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HI-PAR 30-CE
Power Supply
Electromagnetic Control gear included
Mounting options
Remote
Installation
Description
Recessed installation by means of steel brackets.;
Mounting
Ceiling recessed
Wiring
Connection to special control gear box supplied separately.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used.