.jpg)
4876
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Projector for interiors made up of reinforced-plastic cradle, lamp-holding ring and diecast-aluminium lamp-holding cover. Application to electrified track by three-phase adaptor. The product comes complete with polycarbonate transformer-holding assembly fixed to the adaptor close to the track. The mechanical locking system to point the light is placed at one end of the cradle and permits changing the inclination of the projector by about 100° perpendicularly to the horizontal axis. The projector can also be rotated by about 340° around the vertical axis. Several accessories may be installed by a special ring to be ordered separately. IP40 for optical assembly with optional glass diffusers.
Dimensions
Diameter (mm)
ø66
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium and reinforced thermoplastic
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
12394
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electronic Transformer included
Mounting options
Integral
Installation
Description
Fitted to electrified track through a three-phase adaptor. The adapter is provided with an adjustable friction device which allows the projector to be fitted in vertical position.;
Mounting
Three circuit track
Wiring
Wiring located in the polycarbonate transformer-holding compartment, joined to the adapter and made up of a dimmable electronic transformer.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used.