.jpg)
5040
Colour
Technical Data
last update: 25/08/2026Description
Wall-mounted fitting designed to use metal-halide lamp with up-light emission. Provision for auxiliary halogen lamp QT18 - 100W with pre-ignition function. The optical assembly and wall structure are made of cast aluminium subjected to phosphochromate treatment and finished with liquid acrylic paint with high UV resistance. Asymmetric superpure-aluminium internal reflector. The upper transparent hardened soda-lime glass is housed in the assembly with no visible screws. The control gear components are housed in the wall structure.
Dimensions
Diameter (mm)
ø320
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
150
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
4144
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
70
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Wall installation - the installation plate is fixed by means of Fischer screws.;
Mounting
Wall surface
Wiring
Components for electromagnetic control gear. Mains connection by standard terminal board inside the anchoring base.
Notes
Designed to accept 100W HAL B15d auxiliary halogen lamp.