.jpg)
5068
Colour
Technical Data
last update: 25/08/2026Description
Wall-mounted fitting designed to use metal-halide lamp with up/down-light emission. Provision for auxiliary halogen lamp QT18 - 100W with pre-ignition function. The optical assembly and wall structure are made of cast aluminium subjected to phosphochromate treatment and finished with liquid acrylic paint with high UV resistance. Asymmetric superpure-aluminium internal reflector. The upper transparent hardened soda-lime glass is housed in the assembly with no visible screws. Diffusing lower glass. The control gear components are housed in the wall structure.
Dimensions
Diameter (mm)
ø320
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
250
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
6476
Total light flux at or above an angle of 90° (Lm)
13451.28
Light output ratio (LOR)
62
Optic and beam angle
A - Asymmetrical ɣ=127°
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HIT-CE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Wall installation - the installation plate is fixed by means of Fischer screws.;
Mounting
Wall surface
Wiring
Components for electromagnetic control gear. Mains connection by standard terminal board inside the anchoring base.
Notes
Designed to accept 100 WHAL B15d auxiliary halogen lamp.