6168

Direct light luminaire designed to use metal halide lamps with Spot (S) optic. Consists of an optical assembly with fixing bracket and control gear to be ordered separately. The optical assembly, box and rear cover, and the frame are made of aluminium alloy, coated with liquid acrylic paint with a high level of weather and UV ray resistance. The 4 mm thick colourless transparent tempered sodium-calcium closing glass, fixed to the frame with silicone, is fitted with a 50-60 Shore A silicone seal. The frame/glass are fixed to the optical assembly by a stainless steel retaining cable. Super-pure aluminium reflector with Spot (S) optic. The hot-galvanised sheet steel lamp supporting plate, complete with ignitor and line disconnecting switch can be pulled out of the rear assembly. The floodlight can be adjusted ±115° in the vertical plane using a painted steel bracket with a mechanical locking system to guarantee stability and light beam aiming. Adjusts ±120° in the horizontal plane using a hot-galvanised painted plate for fixing to the ground/floor (accessory). Rear assembly fitted with a double M24x1.5 nickel-plated brass cable gland (suitable for cables with Ø 7-16mm). Various accessories available: ground/floor anchor plate, visor, directional flaps, protective grille, fall-prevention net for glass, flanges for single or double installation on poles D=120mm. For all applications other than ground/floor fitting, the reinforcing bracket (accessory code 6175) must be used. All screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.

Installation in ground/floor, wall-mounting (using screw anchors and reinforcing bracket) and on pole systems (with flanges and reinforcing bracket).;