.jpg)
6384
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Adjustable projector with adaptor for installation on mains voltage tracks made of aluminium and thermoplastic material. Version with QR CBC 51 50W low voltage lamp has a polycarbonate transformer compartment located next to the track and connected to the adapter. The fitting can rotate 360° around the vertical axis, with inclinations of 0°/90° with respect to the horizontal plane, with mechanical blocking mechanisms for precision aim on the vertical axis and horizontal plane. An accessory-holder ring can be added to the projector, and it can be installed with the 9448 adaptor without tools. The accessory-holder ring can fit up to three flat accessories at once. The reflector can be removed without tools thanks to the special bayonet mechanism. IP40 for optical assembly with optional glass diffusers.
Dimensions
Diameter (mm)
ø50
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium and thermoplastic
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
12525
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
directional
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
12 VDC
Power Supply
Electronic Transformer included
Mounting options
Integral
Installation
Description
Electrified track or ceiling/wall installation.;
Mounting
Three circuit track
Wiring
Dimmable electronic components for halogen lamps contained inside the special box that is equipped with the fitting.