.jpg)
6675
Colour
Technical Data
last update: 25/08/2026Description
Aluminium track. The wires are housed in the track and enclosed in rigid extruded profiles made of insulating material with high dielectric strength. Two supply wires plus two DALI wires for product control (switch on, dimming). Complete with 49W T16 fluorescent module for uplight emission, with DALI digital dimmable electronic control gear. The fluorescent tube is protected by a transparent polycarbonate screen to prevent dust from depositing on the light source.
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Control gear included
Mounting options
Integral
Installation
Description
Fixed to the ceiling with attachments, suspension rods or cables with different length to be applied on supporting couplings. The track may also be installed at a height lower than 2.50 m from the floor for use near working surfaces.;
Mounting
Ceiling pendant
Wiring
The section of the electrical wires offers the following installation options: 220/250V rated voltage. The connection to the 220/250V single-phase mains permits a total load of 16 A that corresponds to 3500/4000VA. 220/250V rated voltage.
Notes
It is provided with a series of accessories used to couple multiple bars and power the wires. Power supply can be provided by means of end caps (MW17-MW18), direct coupling (MW19), T-coupling (MW22-MW23), cross coupling (MW24) and L-coupling (MW20). All couplings are complete with 5-pole wiring. The lateral position of the earth contact makes the track structure asymmetric and for this reason couplings must be selected accordingly.