.jpg)
7099
Colour
Technical Data
last update: 25/08/2026Description
Wall and ceiling luminaire for public residential areas using 2x13W TC-D compact fluorescent lamps. The body and the frame are made of die-cast aluminium. Complete with the diffuser in textured glass with internal paint finish. Polycarbonate component-holding box with polycarbonate cover. Stainless steel screws with hexagonal head. EPDM perimetral seal for through wiring by means of PG11 cable-clamp.
Dimensions
Diameter (mm)
ø275
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
13
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
107
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
27
Optic and beam angle
GL - general lighting
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
from -20°C to +35°C.
Supply voltage
220-240 VAC
ZVEI code
TC-D
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
The fitting can be fixed to the ceiling or the wall. Hole diameter 240 mm, depth 46 mm. A polystyrene body moulding cover (code 0044) is placed in the formwork to either create the housing for the luminaire in the concrete or to finish the housing in the wall.
Mounting
Wall recessed
Wiring
Wiring contained in the body of the fitting: 230V 50Hz low loss inductive ballasts, 3-pole fast coupling terminal boards, possibility of separate starting for each lamp, silicone cables, radio interference filter.