.jpg)
7201
Colour
Technical Data
last update: 25/08/2026Description
Indirect-light luminaire designed to use metal-halide lamps.It is made up of a glass structure, a lamp compartment and an outer casing.The structure is made of hardened soda-lime glass Linea Azzurra 15mm thick with a metallised-polycarbonate multifocal reflector at the top. The stainless-steel (AISI 304) frame at the base of the structure has a silicone gasket.The light source is inside a cast-aluminium assembly. The lower section houses a decompression box with cascade connection, 6-pole terminal board and double cable clamp M24x1.5 in stainless steel. The location and anchoring of the assembly to the outer casing is ensured by 2 stainless-steel screws M6x25 UNI 5931.The cast-aluminium outer casing used for installation must be ordered separately.One height only is available for the fitting. The anchoring system ensures resistance to uprooting.
Dimensions
General (mm)
1000x194
Height Ground
1000
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Glass
Photometric data
Details
lm system
W system
lm source
W source
20
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2940
Total light flux at or above an angle of 90° (Lm)
120.98
Light output ratio (LOR)
26
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT-CE
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Floor and ground installation.;
Mounting
Ground anchored
Wiring
Electronic control gear.
Notes
Complete with lamp.