.jpg)
7391
Colour
Technical Data
last update: 25/08/2026Description
Outdoor flooflight designed for use with 100 W H.P. sodium-vapour lamps. Manufactured from diecast aluminium with a 99.95% superpure aluminium sheet reflector. Aluminium-sheet component-holding plate with stainless-steel screws. The front part has a protective glass covered opening with a silicone sealing gasket which enables access to the optical box. A double PG 11 cable clamp enables the insertion of cables. The angling system is fixed by using locking screws with the help of a graduated scale.
Dimensions
General (mm)
431x250x146
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
100
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2782
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
55
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HST
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
On a wall or on the ground thanks to the use of a directable rod (in aluminium) to be fixed using plastic expansion plugs.;
Mounting
Pole-top side entry, U-bracket
Wiring
Ballast and ignitor for 100 W White Son lamp inside the fitting. Complete with capacitor.