.jpg)
7877
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Hemispheric lighting body made of aluminium treated with acrylic texturized paint. It contains the optical assembly and the wiring unit. Designed to house an arm for pole fixing with 14 mm diam. stainless steel rods. The optical assembly is protected by means of a frame hinged to the bottom of the structure, complete with silicone rubber gasket and hardened glass sealed with neoprene gasket. The drawn single-piece optics is made of 99.9% superpure aluminium produced using the anodizing technique with polishing treatment and is fixed to the structure with two stainless steel screws. All screws and bolts are in stainless steel.
Dimensions
Diameter (mm)
ø457
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
250
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
8105
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
59
Optic and beam angle
ST - street optic
Glare Index
G*6
Adjustability
up/down tilt
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Applied to buried pole or to pole with plate by an arm. Applied to the wall by fixed or adjustable arm.;
Mounting
Pole-top side entry
Wiring
Cabling for metal halide lamps applied to a plate inside the optical assembly. Complete with capacitor.