.jpg)
8351
Colour
Technical Data
last update: 25/08/2026Description
Downlight designed for use with a 13W compact fluorescent lamp in the horizontal position. Thanks to its professional optics the luminance of the reflector can be limited to values smaller than 200 cd/m^2 with angles of observation greater than 60° with respect to the vertical axis (ref. CIBSE LG3 and DIN 5035 Teil 7 A60). Two brackets made of galvanized sheet steel are fixed to the die-cast aluminium perimetric ring to support the component box, also made from sheet steel. The lamp holder is fixed to the component box, which can be extracted from the fitting for easier maintenance. The superpure aluminium reflector is screwed to the fitting at the bottom.
Dimensions
Diameter (mm)
ø187
Shape
Round
Recessed hole dimensions (mm)
ø178
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
13
Luminous efficiency - lm/W (system value)
lm in emergency mode
171.99
Maximum intensity (cd)
483
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
66
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
TC-DEL
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Holes of 178 mm diameter for recessed installation. The brackets for fastening the support ring can be adjusted through sliders to fit false ceilings 1 to 30 mm thick.;
Mounting
Ceiling recessed
Wiring
Low-loss electromagnetic ballasts and emergency-light inverter.