.jpg)
8469
Colour
Technical Data
last update: 25/08/2026Description
Spotlight for interior lighting made up of a rear body housing the lampholder and of a front cylinder housing the light source - both made of diecast aluminium. The lower part has a groove where it is possible to insert an aluminium rod to which glass diffusers of various colours may be applied. The base is coupled to the spotlight by means of a diecast aluminium rod permitting its 330° rotation and 90° inclination with respect to the vertical axis.Control gear box made up of a diecast aluminium bearing base with the electrical components for discharge lamps, painted moulded polycarbonate cover resistant to 850° NF C20, aluminium mechanical fixing system with screw and helicoidal spring for correct positioning.
Dimensions
Diameter (mm)
ø150
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
100
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
14912
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
34
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HST
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Installation on electrified track by means of multiphase adapter.;
Mounting
Three circuit track
Wiring
Complete with U.V. filter and capacitor. The wiring for sodium lamps is located inside a special component-holding box to be applied to the track.
Notes
The following accessories can be used: accessory-holding support (cod.8724), glass diffuser (cod.8721), coloured glass (cod.8712), concentric fresnel lens (cod.8714), longitudinal fresnel lens (cod.8715), louvre (cod.8716), adjustable barn doors (cod.8717), wall-washer screen (cod.8718).