.jpg)
8472
Colour
Technical Data
last update: 25/08/2026Description
Low voltage floodlight for indoor lighting made in die cast aluminium. The fitting is composed of a body housing the lampholder and a cylinder housing the light source. A polycarbonate box located in the lower part contains the electronic transformer. The groove located in the lower part of the box can house an aluminium rod which supports coloured glass diffusers. The adapter is fitted to the floodlight through a die cast aluminium rod which allows rotation of the fitting by 330° horizontally and 90° vertically. Supplied with dimmer.
Dimensions
Diameter (mm)
ø135
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
20052
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electronic Transformer included
Mounting options
Integral
Dimmable option
Dimmable
Installation
Description
Fitted to an electrified track through a multi-phase adapter or to the wall by base.;
Mounting
Three circuit track
Wiring
Complete with built-in electronic transformer for 50W halogen lamps.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used. The fitting can also use PAR36 50W lamps with M4 socket.The floodlight can use the following accessories: accessory rod (code 8720); glass diffuser (code 8721); coloured glass (code 8702); louvre (cod.8726).