.jpg)
8478
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Low voltage floodlight for indoor lighting made of die cast aluminium. The fitting is composed of a body housing the lampholder and of a cylinder housing the light source. A polycarboinate box houses the electronic transformer. The floodlight is provided with an optical system with lens used to frame the emitted light. The adapter is fitted to the floodlight through a die cast aluminium rod which allows rotation of the fitting by 330° horizontally and 90° vertically.
Dimensions
General (mm)
77x205x246
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
661
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
33
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electronic Transformer included
Mounting options
Integral
Installation
Description
Fitted to an electrified track through a multi-phase adapter ot to the wall with base.;
Mounting
Three circuit track
Wiring
Complete with built-in electronic transformer for 50W dichroic halogen lamps.
Notes
Use light sources with a 24° light cone. For the photometric data of the fitting refer to the photometric data of the light sources used.