.jpg)
8528
Colour
Technical Data
last update: 25/08/2026Description
Fitting for fluorescent lamps designed for indoor accent lighting. The body is made of extruded aluminium and houses the lamps, the anti-iridescence reflector made of preanodized 99.85% aluminium plate and the control gear. The body is closed with injection-moulded plastic end caps. Supplied standard with an anti-glare plastic grid. Fixed to the electrified track by means of a universal adapter. The adapter is fixed to the fitting with an articulated plastic bracket which allows for 340° horizontal rotation that can be blocked by a screw. The joint located between the body and the bracket allows for 90° vertical rotation. The joint is blocked with a screw for stable emission.
Dimensions
General (mm)
580x110x250
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Photometric data
Details
lm system
W system
lm source
W source
36
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
777
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
41
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
TC-L
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Fixed to standard mains voltage electrified tracks with three-phase adapter or to special ceiling/wall by base (cod.8773).;
Mounting
Three circuit track
Wiring
Traditional ballast contained in the body of the fitting.