.jpg)
8889
Colour
Technical Data
last update: 25/08/2026Description
Downlight designed for use with 4x75 W Superspot lamps + 1x55W fluorescent lamp TC-L . It is made up of a perimetric metal rim and an aluminium sheet shell housing the optical assemblies, the 99.85% superpure aluminium reflector, and the components for the fluorescent lamp. The fluorescent assembly is closed by a tempered externally- sandblasted soda-lime glass fixed to the shell through steel springs. The superspot lamps are located on diecast aluminium rings directable through technopolymer universal joints (+/- 45° rotation with respect to the vertical and horizontal axes) - also permitting stablity of the angling system. The following accessories may be installed upon request: coloured glasses, refractor for an elliptical distribution of the light flow, and 45° cut-off louvre.
Dimensions
Shape
Rectangular
Recessed hole dimensions (mm)
1244x169x184
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
2.93
Light output ratio (LOR)
47
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Recessed fitting: the shell is fixed to the false ceiling through adjustable brackets on sliders. The perimetric rim also acts as a ledge.;
Mounting
Ceiling recessed
Wiring
Direct connection to 230 V mains voltage, while the electronic control gear for compact fluorescent lamps TC-L is inside the fitting.
Notes
For the photometric data of the fitting, refer to the photometric characteristics of the light source.