.jpg)
9045
Colour
Technical Data
last update: 25/08/2026Description
Direct/indirect emission fluorescent system with contiguous modules designed for use with 2x58W tubes T26. The module is made up of an upper extruded aluminium section and a lower extruded aluminium section acting as a cover plate for the electric wiring. The upper section houses a 99,85% superpure aluminium coroidal reflector. The module is closed by a louvre or by a plastic diffuser, supplied as accessories.
Dimensions
General (mm)
2000x130x45
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
58
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
1401
Total light flux at or above an angle of 90° (Lm)
1044,8
Light output ratio (LOR)
94
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
T 26
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Suspended or fixed to the ceiling.;
Mounting
Ceiling surface, Ceiling pendant
Wiring
The wiring is housed on removable aluminium plates located in the two end caps. Composed of: Deos starter, ballast, capacitor, radio interference filter. Fast-coupling terminal boards to supply the module at both ends, using the internal wire as electrical bridge when assembling several modules in a sequence.
Notes
IP40 guaranteed by the polycarbonate diffuser screen.