.jpg)
B169
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Direct-light lighting system designed to use metal-halide or sodium-vapour lamps 150W for symmetrical optic. The system is made up of a parallelepiped optical assembly, U-shaped arm and adaptor for the pole. The optical assembly is made of texturised liquid acrylic paint aluminium. The lower section is closed by a protection glass hardened and sealed by a neoprene gasket. The bowl is fixed to the lower frame by means of a hinging system that permits opening the system to access the component assembly and the optical assembly. The polished 99.9% superpure aluminium reflector is fixed to the body by means of stainless steel screws. The ceramic socket is equipped with an anti-loosening device for the light source and is fixed to the reflector by aluminium supports. The U-shaped galvanised-steel supporting arm is fixed to the frame of the optical assembly by threaded dowels. The system is applied to the pole by means of an adapter designed for a diameter of 102 mm. The adapter is fixed to the U-shaped arm by fixing screws and to the pole by 4 dowels.
Dimensions
General (mm)
405x405x179
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
150
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2725
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
67
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HST
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Application to poles with buried base (possible heights: 3500 mm, 5000 mm, 7000 mm) or with plate (height 5000 mm);
Mounting
Poletop bottom entry
Wiring
A disconnecting switch with fuse can be inserted upon request for fast and safe maintenance. The lampholder is connected to the wiring plate by a fast-fitting terminal board. The aluminium component-holding plate is equipped with control gear comprising explosion-proof capacitor.