.jpg)
B692
Colour
Technical Data
last update: 25/08/2026Description
Diffused-light luminaire designed to use TC-TEL lampsfor emergency operation SA (always on). Emergency operation lasts 1 hour; 12 hours are needed to recharge the batteries. NiCd batteries 3.6V 1.2Ah. It has a die-cast aluminium frame, a protection grid made up of three longitudinal elements, a polycarbonate diffuser and an EPDM perimeter gasket that ensures Protection Degree IP66. The polycarbonate component-holding box comes complete with a polycarbonate protection cover to ensure Insulation Class II. All the fittings in the series are also equipped with a cable clamp PG11 for perfect tightness in the insertion point of the power supply cable. All screws are made of stainless steel (A2).
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
26
Luminous efficiency - lm/W (system value)
lm in emergency mode
181.98
Maximum intensity (cd)
193
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
28
Optic and beam angle
GL - general lighting
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
TC-TEL
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral
Installation
Description
Wall-mounted fitting for emergency operation (SA);
Mounting
Surface mounted
Wiring
Built-in electronic ballast.