.jpg)
B753
Colour
Technical Data
last update: 25/08/2026Description
Wall-mounted luminaire designed to use TC-TEL lampsfor emergency operation SA (always on). Emergency operation lasts 1 hour; 12 hours are needed to recharge the batteries. NiCd batteries 3.6V 1.2Ah. The polycarbonate assembly comes complete with protection cover, component-holding plate and control gear with fast-coupling 3-pole terminal boards and cable clamp PG11. Die-cast aluminium external frame. The pressed-glass raised diffuser with optic texture is painted inside. All screws are made of stainless steel (A2).
Dimensions
General (mm)
300x300x116
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
18
Luminous efficiency - lm/W (system value)
lm in emergency mode
155.04
Maximum intensity (cd)
109
Total light flux at or above an angle of 90° (Lm)
12.3
Light output ratio (LOR)
29
Optic and beam angle
GL - general lighting
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
TC-TEL
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral
Installation
Description
Wall-mounted fitting for emergency operation (SA);
Mounting
Surface mounted
Wiring
The control gear inside the body of the fitting is made up of extra-low-loss electronic ballasts, fast-coupling 3-pole terminal boards, possibility of separate starting for each lamp, silicone cables, radio interference filters.