Region and Language

Product standard

Your language

B865

Downloads Downloads

Colour

Optional components

Technical Data

last update: 01/08/2026
Description
Modular system to light façades, for use with T16 light tubes. Each single module has an extruded aluminium profile, with die-cast aluminium end caps with PG11, fastened with special captive M4 screws, and special EPDM gaskets. The optical compartment has a glass screen with serigraphy that is fastened with silicone directly to the extruded profile. The optical compartment houses, on a plate of steel sheet, the 99.95% ultrapure aluminium reflector, the fluorescent tube, the lamp holder, and the electronic power supply for T16 tubes. Normal maintenance operations are facilitated by the fact that the plate where all of the components are held may be extracted.
Dimensions
General (mm) 972x101x117
Shape Rectangular
Recessed hole dimensions (mm) 953x132x122
Technical performance
  • Class I

    Class I

  • Completely protected against penetration of dust, Protected against the effects of immersion

    Completely protected against penetration of dust, Protected against the effects of immersion

  • IK10 - Protected against 20 J shocks

    IK10 - Protected against 20 J shocks

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Die-cast aluminium
Product certification
  • ENEC-03
    ENEC-03

Photometric data

Details

W source
21
lm in emergency mode
-
Maximum intensity (cd)
287
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
31
Optic and beam angle
VWF - Very Wide Flood 81° / 91°
Adjustability
fixed

Charts and polar curves

Electrical data

Operating ambient temperature range
from -20°C to +35°C.
Voltage
220 - 240 AC
ZVEI code
T 16
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
DALI

Installation

Description

Recessed installation in floors, walls, and ceilings via counterframe which is supplied separately.;
Mounting Wall recessed, Ceiling recessed, Ground recessed
Wiring DALI electronic power supply included inside the fitting. The quick-connecting terminal blocks housed in two thermoplastic boxes, complete with PG11, permit cascade connection of various contiguous modules.

Notes

Accessories available upon request: longitudinal louvre cut-off 40° / 60°, transversal louvre cut-off 40°, anti-glare screens, decorative screens, and coloured filters.
Subscribe