.jpg)
BD23
Colour
Technical Data
last update: 01/08/2026Description
Ground-recessed luminaire, designed to use halogen lamps (PAR 20). Supplied with fixed optic. Consists of a circular body and a frame made of AISI 304 stainless steel, with surface treatment to increase resistance to corrosion and black painted aluminium die-cast connecting ring. The product has an 8 mm thick tempered sodium - calcium closing glass which resists a static load of 1000 kg, plus a black EPDM seal. With aluminium component-holding plate. The base of the product is fitted with a stainless steel PG16 cable clamp, complete with 1 m power cable and anti-transpiration device. The frame, glass and optical assembly together guarantee resistance to a static load of 2500 kg. All external screws used are made of A2 stainless steel.
Dimensions
Diameter (mm)
ø145
Shape
Round
Recessed hole dimensions (mm)
ø103
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.85
Material
Stainless steel
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2679
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
98
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Charts and polar curves
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Installation
Description
Ground-recessed, with outer casing installed flush with ground level and concrete poured around it covering a gravel base for secure positioning and rainwater drainage respectively. Outer casing dimensions D = 149 H = 278.;
Mounting
Ground recessed
Wiring
Wiring contained in luminaire body for halogen lamp PAR 20 50W
Notes
The luminaire should be installed with the outer casing (code 5997), which can be ordered separately. For the photometric data of the fitting refer to the photometric data of the light sources used.