BD91

Outdoor luminaire with direct light street optic, designed to use LED lamps. Optical assembly, door and cylinder made of die-cast aluminium, with dual phosphorous – chromium plating of the base metal, passivation at 120°C, RAL 9007 grey liquid paint or textured black, curing at 150°C; possibility of using a graduated scale to adjust the angle relative to the road surface by + 15°/-5°. Diffuser sealed with silicone to PMMA body with4 mm thickness, 50 Shore black silicone gasket. Optical assembly and door fixed together by a hinge and two clips, allowing tool-free opening. High level IP protection is guaranteed by the 50 Shore black silicone seal interposed between the two elements. Automatic retention system for steel door. Optical assembly complete with decompression valve, for easy opening by eliminating the internal vacuum. Complete with circuit having 39 monochrome LEDs in Cool White (6000K) colour, optics with plastic lens. Control gear connected with quick-coupling connectors and fixed to the body by 2 screws. Driver with automatic inner temperature control system and 4 preset operating profiles (default cycle 100%) which can be selected using microswitches. Operating cycles can be customised using dedicated software which can be transferred using the USB interface (available upon request). Selv 220 - 240V ac 50/60 Hz electronic power supply. The optical assembly is fixed to the wall-mounting or pole-top attachment by two fixing screws with the Elicel system. Two safety bolts make it easy to fit. The light flow emitted in the upper hemisphere of the Delphi small body in the horizontal position is null (in conformity with the most restrictive standards for the prevention of light pollution). All external screws used are made of stainless steel.

The floodlight can be installed on a pole (even with an arm), with a single (ø60/ø76 mm), double (ø60/ø76 mm) or triple (ø60/ø76/ø102 mm) pole-top attachment, or it can be wall-mounted. Installation on a pole may be flush with 6000 mm, 7000 mm or 8000 mm poles (from iGuzzini), or external (with poles not from iGuzzini). Versions with poles for burial and with base plate. Installation on pole with arms, made of hot galvanised steel coated with acrylic liquid paint, using a flange with ø102 mm (for all poles) or with screws (only for iGuzzini poles).;

IK10 with accessory