.jpg)
BE13
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Diffused light system, designed to use compact fluorescent lamps. Consists of a component holding body and glass screen. Aluminium alloy component holding compartment and ready-galvanised steel plate for fixing to the wall. The 13-20 mm thick extra-clear sodium-calcium outer glass closing screen is joined with silicone to an aluminium alloy ring and an inner screen made of opal white methacrylate. The ring and glass screen assembly is fixed to the component holding compartment using hexagonal head captive screws. All aluminium parts are coated with liquid acrylic paint with a high level of weather and UV ray resistance. Single cable inlet using a PG13.5 grey polyamide gland, suitable for cables with 8.5-12.5mm diameter. System for wall-mounting using screw anchors for concrete, cement and solid brick. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
Diameter (mm)
ø100
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
11
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
37
Total light flux at or above an angle of 90° (Lm)
150,5
Light output ratio (LOR)
58
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
TC-TSE
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Wall-mounted
using screw anchors for concrete, cement and solid brick.;
Mounting
Surface mounted
Wiring
without (for fluorescent mains voltage lamps)